Hi all,
I just purchased “Pepwave MAX BR1 Slim” and wanna know if it support VPN bonding ?
We have one PPPOE + 4G SIM, want to aggregate them to speed up the internet experience.
Thanks!
Hi…
Looking at the datasheet this device support speedfusion.
" PepVPN / SpeedFusion Hot Failover " can be read at datasheet.
I also… check at Peplink Online Shop and don’t find any separated license to buy and do the speedfusion activation.
Take a look at your device.
Dashboard > Advanced
Can you see SpeedFusion VPN label at the left side?
1 Like
Hello, Thanks for your advise.
I do see the feature, but there seems no any option for Traffic distribution as Bonding?
This is my unit config page:
Below is what I am gonna want but can not find it, below is captured from another different model peplink unit.
Hi…
Maybe because your firmware it is too old.
But… you have speedfusion.
Look the Wan Smoothing… “normal”, you also have FEC.
and below… you already selected priority highest for pppoe, 4g and wifi.
Just leave your old device at normal and the new device at bonding… you will be fine.
1 Like
I am using fw-max_br1_br2-8.3.0-build5256 .
That is the latest and only downloadable firmware , is that still “Old” ?
If the peer site also the same model and Firmware, does the bonding work?
