Daisy chain

Product Discussion Peplink Balance
1

I HAVE A TWO BUILDING CAMPUS…I HAVE A PEPLINK 20 CONNECTED TO TWO BB CONNECTIONS (UVERSE/COMCAST) IN ONE BUILDING.

I HAVE AN ETHERNET CONNECTION BETWEEN THE BUILDINGS

IN THE SECOND BUILDING I HAVE A UVERSE CONNECTION.

CAN I PLACE A SECOND PEPLINK 2O IN THE SECOND BUILDING AND CONNECT ONE OF ITS WAN PORTS TO THE FIRST BUILDINGS PEPLINK’S LAN PORT VIA ETHERNET AND THEN CONNECT ITS SECOND WAN PORT TO UVERSE AND CAN IS USE AND LOAD BALANCE THE FIRST BUILDINGS PEPLINK LAN PORT AS ONE BROADBAND WAN CONNECTION/SOURCE IN CONJUCTIION WITH THE UVERSE CONNECTION AT THE SECOND BUILDING?

2

Sure, this will work just fine. The only thing to be aware of is that you do not want both Peplinks using the same IP range.

3

great…can you pls give me some guidance has how to manually set the IP range of the second peplink

4

When you configure the second Peplink just change the default IP and DHCP range to something different than the other one. For example, if the first unit is using 192.168.1.1 then the second one should use 192.168.2.1

5

awesome thanks…easy enough!