BGP advertising

BRYAN_SD · July 10, 2019, 5:00am

Hi peplink

I am trying to configure an additional WAN IP address /32 to be advertised in BGP on a Balance 710 but I am not sure how this is configured using BGP?

Regards

Steve

Ron_Case · July 10, 2019, 10:22am

Step 1 - Configure the additional public IP on the WAN interface under: Network> WAN> Additional Public IP Address Settings.

Step 2 - Add a BGP profile for the WAN interface under: Network> Routing Protocols> BGP. Configure the router ID, etc. and you can select which networks to be advertised.

BRYAN_SD · July 10, 2019, 11:14am

Thanks does the WAN interface have to be set NAT?

Ron_Case · July 10, 2019, 11:53am

Not that I am aware of, IP forwarding should work.