Balance 20 with Cisco AIR-LAP1131AG-A-K9 AP


#1

Can Peplink balance 20 act as a WLAN controller for Cisco AIR-LAP1131AG-A-K9 AP ?. Appreciate any help.


#2

Hello,

On 6.1 firmware the B20 does have AP controller capabilities but it is unable to manange/control rogue APs. It would need to be a Pepwave AP.


#3

IF the AP supports bridge mode, will it work with any AP ?.


#4

Any AP should work with the Balance router but only Pepwave products can be managed by the Balances AP Controller.