Balance 20 capabilities

Product Discussion Other Products
1

There is a customer having 30 branches. All applications are in cloud and there is no head office.

There will be 20 users in each branch. they prefer go with balance 20 boxes with speedfusion due to cost concerns.

so what output we can expect for below criteria.

  1. No of ipsec tunnels
  2. Bw aggregation possibility
  3. Bw limit for aggregation
  4. Active backup configuration
  5. Active active WAN link configuration for wan link load balancing
  6. Content blocking and url blocking possibility
  7. No of LAN and WAN Ports
2
  1. No of ipsec tunnels
    Two
  2. Bw aggregation possibility
    Load balanced sessions aggregated
  3. Bw limit for aggregation
    150Mbps Load balanced
  4. Active backup configuration
    Yes
  5. Active active WAN link configuration for wan link load balancing
    Yes
  6. Content blocking and url blocking possibility
    Yes
  7. No of LAN and WAN Ports
    4 x LANs, 3 wired WANs, 1 x USB WAN

Product Page here https://www.peplink.com/products/balance-20/

You really ought to be talking to a Peplink partner… they can help with this stuff.

2 Likes
3

hi Martin,

Thanks for your feedback. could you please give your inputs for below as well.

  1. what means for 5 VPN Peers.
  2. In the given use case of 30 branches with balance 20 bundled with speadfushion without a headend devise, does it enable communication between branches while communicating to the cloud hosted applications.
  3. is it possible to have a teams meeting with you for few minutes with our client, as it would make confidence about the solution with the client as we also new to peplink

Thanks & BR
+94 71 6845848

4

It means I didn’t read the product spec :slight_smile: Balance 20 supports 5 VPN tunnels not 2.

No. You would want to add a hub device. In this case a Cloud hosted Fusionhub would be the best approach since all their apps are in the cloud too. All Balance 20’s woudl create a Speedfusion bonded tunnel to the fusionhub virtual appliance and they would all be able to route traffic to the cloud and to each other reliably.

I do like talking about Peplink devices but perhaps someone nearer your timezone could help? Hey @MacBee can you help?

5

Hi - Thanks Martin

Hi @Thiraj - you can share your details on DM and we can setup a teams meeting.

6

Hi MacBee,

Sure,please revert with a possible time for a meeting. we are running a PoC with peplink products. We can discuss the all the matters after the PoC. Thank you very much for the support. The local distributor gives us a great support ’ Innexgen International Holdings (Pvt) Ltd. We are the solution front ender for the client.

Further we would like to certified us with peplink certifications to gain support confidence in the mind of customers.

my details as follows.

Thiraj De Silva
Director Sales Marketing
Inzet Solutions Private Limited
No. 68/14, Kaviraja Mawatha,
Panadura, Sri Lanka.
Mob. +94 716 845 848
E-Mail - [email protected]
Web. www.inzet.lk

7

Hi MacBee,

One of our clients, evaluating below solutions. Could you please let us know the cost effective solution available with peplink for similar scale.

  1. Cisco Meraki_ MX84 to Head office and MX64 for Branches [4 Nos]
  2. Fortinet_ 200F to Head office and 40F for Branches [4Nos] with Forti Manager

Further we require product knowledge in designing solutions. it would be great, if we can have a online discussion for about 30Min.

Thiraj
+94 722 100 400
[email protected]