B-One Web Access Port Should Be Displayed

Product Discussion Feature Requests
1

In the process of setting up my PepLink B-One, I followed advice from Michael Horowitz of https://routersecurity.org/. I have chosen to use a Web Admin Port to restrict access with my B-One. This is set on the “System - Admin Security” page and the IP for it is set on the “Network- Network Settings - LAN - Untagged LAN” (or what ever the Untagged LAN was renamed with) page. So to access my B-One, I need to use the IP:Port I have set, which works well.

Now what I would like to see is the Web Admin Port value displayed in two other places then where it is being set.
The IP Address in the “Network - Network Settings - LAN - Untagged LAN (or whatever it is called)”, the Web Access Port value should also be shown.
On the “Dashboard - LAN Interface”, the Web Access Port value should be shown here as well.

I believe in both places, the IP and Web Admin Port are both part of the requirement for accessing my B-One and should be shown.

My present B-One firmware is 8.5.3 build 6030.

2

I’m not convinced of the value of this to be honest.

Showing it on the LAN settings page feels weird and could be misleading, because you can limit access to the webadmin to/from different vlans so I don’t think its a logical place to show it, since unless those access rules are taken into account.

Why? If you have logged in you’ll see it in the address bar?

3

I am quite new to the B-One and Peplink so I just figured there was a single location where the Web Admin Port was set and thought it natural for it to be associated with the IP in those two places. I knew you could see it in the address bar but still thought it natural to always have the IP and Port together.

As for your comment that you can limit access to/from different VLANs, is that the “User Account IP Address Reservation” setting or some other means?