Im trying to advertise routes (public IPs) over OSPF to a BGP gateway where our traffic will go onto the internet.
We have an OSPF relationship with the 580x on the remote site.
But on the FusionHub side (running in VM) I dont see an advanced tab, there is no routing setup on the Fusion Hub end of the ink.
Is there a way to get this to show?
hi…
Are you running the last version… 8.5.1? correct?
FusionHub is a SpeedFusion concentrator and nothing more.
8.0.1 build 1644
So there is no way to have a routing session with the Speed Fusion Hub? Is there something missing ? It reaches the internet like this, and its passes static routes, but it needs to be dynamic.
You should really update to 8.5.1 and then these options will be available. You’re a few years behind in software versions.
Hi, @jmoraal
You need to update it…
@ChristopherSpitler , wrote to you… updating it… You will get ospf.
8.1.3 https://download.peplink.com/firmware/fusionhub/fw-fusionhub_sfcn-8.1.3-build5023.bin
8.2.1 https://download.peplink.com/firmware/fusionhub/fw-fusionhub_sfcn-8.2.1-build5093.bin
8.3.0 https://download.peplink.com/firmware/fusionhub/fw-fusionhub_sfcn-8.3.0-build5140.bin
8.4.1s032 https://download.peplink.com/firmware/fusionhub/fw-fusionhub_sfcn-8.4.1s032-build5198.bin
8.5.1 https://download.peplink.com/firmware/fusionhub/fw-fusionhub_sfcn-8.5.1-build5246.bin
8.5.1s045 https://download.peplink.com/firmware/fusionhub/fw-fusionhub_sfcn-8.5.1s045-build5258.bin
I show to you all the version, after your 8.0.1, because… I don’t know if you can go directly to 8.5.1… maybe you need to go to 8.1.x, 8.2.x, 8.3.x and 8.5.x
Thanks guys, we just killed the VM and installed 8.5.1
The routing options are all there under advanced.
I turns out it might be easier to use BGP in this instance than OSPF, we are experimenting.
Thanks for the input
Just a note that you can upgrade the image in a VM, it’s the same as updating a device, so you don’t need to blow away a VM unless you really want to 
