8.3 GPS Forwarding issue

Product Discussion Pepwave MAX
1

I have a MAX BR1 Mini that I am attempting to setup Default / Stationary GPS forwarding. The current firmware is 8.3.

Default w/o Stationary works as expected. When setting Stationary (100m / 300s) reporting every 60 seconds and Default at every 5 seconds, I only receive a message every 60 seconds no matter how far I drive.

I have also noticed that after applying changes to the GPS forwarding, the CPU load goes to 100% and stays there until I reboot the device.

Any ideas?

2

Hi,

Have exactly the same issues.
Pepwave MAX BR1 MK2 (8.3.0s082 build 5131).

Have you found any solution?

3

I’m also having a related issue with stationary GPS when forwarded. I use it with Traccar for external fleet tracking. When a vehicle is stationary, it sets its position to the middle of the atlantic ocean, or sometimes some other random and incorrect location. Once moving, the position becomes correct again.

4

Hi,

Both issues fixed for MAX BR1 MK2 in fw-max_br1mk2_hotspot_sohomk3-8.3.0s263-build5134.bin.