I need to run a network capture using 'remote network capture’ to a server on the LAN of a fusionhub.
My guys tell me that the remote network capture traffic is forced out of the WAN of a FusionHub even if the target IP is in the LAN Subnet.
Anyone have experience of this? @TK_Liew any ideas?
2 Likes
Hi.
I think I was wrong Martin and it’s the other way.
It’s possible to send capture to a local LAN address (to Netcat for example), but not to a public IP through the Wan.
I would like to send Lan/Wan capture of a router on a customer’s site to a server in our datacenter or in the Cloud. Or the Na/Wan capture of a FusionHub to a public server.
Thank you.