Testing SF bonding configuration

Product Discussion Pepwave MAX
1

I have setup a FusionHub solo appliance on Vultr and testing bonding a 30 mbps Wan with a Wifi as wan LTE hotspot using a Max 700 rev2.

Bonding is applied simply by ensuring both wans are in same priority on SF profile and dashboard?

Should I be seeing traffic mirrored on both wans when routing through SF vs one WAN when not routing traffic through SF?

2

Hi Stego,

if you have not selected to forward the complete traffic to the tunnel, you should setup Outbound Policies to define which traffic should be routed through the tunnel.

Regards
Theo

3

Yes for now I forward all traffic to the tunnel since it’s only our live-streaming rig and second laptop connected to the Max 700 when live-streaming.

I wanted to basically test the difference on WAN utilization when going through SF vs not.