I’ve noticed a few instances of losing starlink on the PepVPN/Speedfusion tunnels, where it gets stuck in a wan down/no data received status.
I suspect it’s going to be something like a stuck session in an NAT device (possibly the CG-NAT) following a disconnect.
At the moment I have SF on TCP port 443.
Firmware 8.3 RC2 on a 20X connecting to a pair of fusion hub VM’s in different DC’s/Providers (Happens to both of them).
Usually disabling/re-enabling the WAN on the 20x solves it but I was hoping there’s an easier option or Peplink could think about putting some kind of WAN reset code into speedfusion itself (I.e if the wan gets stuck at no data for a length of time then back off wait a bit and then retry)