Lost the directions on how to load wifi from the Factory Settings as I just reset everything. I can see the “PEPWAVE_BDD0” wifi as option but don’t know the factory password and any subsequent steps to load a password protected network.
Hi Thomas,
navigate on AP section of you peplink’s Admin Page and click on the SSID name.
As you can see in the following image here you can see and change the password of your wifi.
Hope this help!
Cristian
Hi Thomas,
The Default WiFi password is the last 8 digits of the LAN MAC address, which can be found on the silver label on the bottom of your device. Note, these are the last 8 digits, excluding the :
Example A1:B2:C3:D4 would be A1B2C3D4
1 Like