Questions regarding current state of Pepwave IPv6 support

Hi,
Section3.2 of the pepwave_max_firmware_manual-fw7.pdf says “IPv6 support” under “Other Supported Features”, but I cannot find any technical details on *.peplink.com that says anything beyond IPSec passthrough works but is dependant on WAN side SLAAC.

There has been a very good IETF reference (RFC 7084 - Basic Requirements for IPv6 Customer Edge Routers) that outlines minimum IPv6 support requirements for SME routers.

We would very much like to see IPv6 as an option considering the cost of an IPv4 address on the open market is expanding rapidly.

Thanks
Dana

2 Likes