Hi all,
We try to use PepLink 380 (firmware : 5.4.9s21 build 2645) and Juniper SRX-240 ( JUNOS ) to create site-to-site VPN tunnel.
But we occur problem as below pic.
When tunnel rebuild, we will get one ping loss during long ping test. (Highly frequency)
Does anyone ever meet this situation ?
Phase_1 : pre-g2-2des-sha1
Phase_2 : nopfs-esp-3des-sha1
Log information:
[TABLE=“class: stat_table content_table, width: 634”]
[TR=“class: zb2, bgcolor: #E6E6E6”]
Mar 18 16:14:18
IPsec: 1. HQ to LA - CHT/1x2 - Disconnected
[/TR]
[TR=“class: zb1”]
Mar 18 16:14:18
IPsec: 1. HQ to LA - CHT/1x1 - Disconnected
[/TR]
[TR=“class: zb2, bgcolor: #E6E6E6”]
Mar 18 16:13:38
IPsec: 1. HQ to LA - CHT/1x1 - Connected
[/TR]
[TR=“class: zb1”]
Mar 18 16:13:38
IPsec: 1. HQ to LA - CHT/1x2 - Connected
[/TR]
[TR=“class: zb2, bgcolor: #E6E6E6”]
Mar 18 16:13:37
IPsec: 1. HQ to LA - CHT/1x1 - Initiating Main Mode connection…
[/TR]
[TR=“class: zb1”]
Mar 18 16:13:37
IPsec: 1. HQ to LA - CHT/1x2 - Disconnected
[/TR]
[TR=“class: zb2, bgcolor: #E6E6E6”]
Mar 18 16:13:37
IPsec: 1. HQ to LA - CHT/1x1 - Disconnected
[/TR]
[TR=“class: zb1”]
Mar 18 16:12:57
IPsec: 1. HQ to LA - CHT/1x1 - Connected
[/TR]
[TR=“class: zb2, bgcolor: #E6E6E6”]
Mar 18 16:12:57
IPsec: 1. HQ to LA - CHT/1x2 - Connected
[/TR]
[TR=“class: zb1”]
Mar 18 16:12:56
IPsec: 1. HQ to LA - CHT/1x1 - Initiating Main Mode connection…
[/TR]
[TR=“class: zb2, bgcolor: #E6E6E6”]
Mar 18 16:12:56
IPsec: 1. HQ to LA - CHT/1x2 - Disconnected
[/TR]
[TR=“class: zb1”]
Mar 18 16:12:56
IPsec: 1. HQ to LA - CHT/1x1 - Disconnected
[/TR]
[TR=“class: zb2, bgcolor: #E6E6E6”]
Mar 18 16:12:16
IPsec: 1. HQ to LA - CHT/1x1 - Connected
[/TR]
[TR=“class: zb1”]
Mar 18 16:12:15
IPsec: 1. HQ to LA - CHT/1x2 - Connected
[/TR]
[TR=“class: zb2, bgcolor: #E6E6E6”]
Mar 18 16:12:15
IPsec: 1. HQ to LA - CHT/1x1 - Initiating Main Mode connection…
[/TR]
[/TABLE]
many thanks,
Tony.