Packet dump CLI command?

[Dave]

Greetings,

I am somewhat new to Peplink. Is there a facility to run a packet dump (tcpdump or similar) on the command link? Tried to find documents and posts, but not much luck there.

Thank you,

David

[MartinLangmaid]

Hi Welcome to the forum!

@Dave

Is there a facility to run a packet dump (tcpdump or similar) on the command link?

No. There is a web ui to do it though. There is a guide here for remote packet capture but its easier to do a local capture if you only need to run it for a moment:

How to Enable Remote Packet Capture with Wireshark

As of Firmware 6.3, Peplink devices can send packet information to an external client, where it can be analyzed by Wireshark. To enable this feature, please follow these steps: 1) Download Wireshark and Netcat Please follow the links to download the programs: Wireshark Packet Analyzer Netcat 2) Enter Netcat Command Once Wireshark has been installed, navigate to the command prompt and adapt the following command to your installation. C:\nc\nc.exe -l -p 12345 | “C:\Program Files\Wireshark\wi…

[Dave]

Awesome thank you.

[system]

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.