Hi,
Do you have outbound policies configured?
You might be able to push outbound policies based on tag. While you need to enable/change the Starlink subscription anyway you can then add a different tag with a different outbound policy configuration in InControl2.
With this you can leave the WAN options on prio 1 and use for example Priority outbound policy to use one WAN option at a time.
More on the different outbound policies here:
Outbound Policy allows you to define how your LAN-to-Internet traffic gets routed out via a number of rule/algorithm options. Each deployment is unique and Peplink’s flexible and easy to use UI allows you to setup options quickly. InControl 2 (as of latest firmware) enables another option to manage Outbound Policy .
Easily define your rules under Network > Outbound Policy:
Make sure that Outbound Policy at the top is set to Custom
[Untitled%20drawing]
[image]
The following types of Outboun…
Outbound policy management in InControl2 allows you to upload a configuration file saved from a device, view or optionally change the rules’ schedule, and then apply these policies to one, or multiple devices.
To configure the Outbound Policies:
Configure the outbound policies on the web admin interface of one of your Peplink routers.
When applying rules to sets of devices only WAN connections with matching names (eg WAN 1) will be active.
For example, to apply a rule that forces certain tr…
Hope this helps.
2 Likes
