InControl Cloud Public IP Addresses and Ranges


In a situation where you have a firewall between you device and the Internet, you might not be able to access InControl. Get through this, you need to create an outbound rule for InControl 2 traffic. There are 2 options for doing this:

Option 1: Simply define a rule for the domain “

Option 2: If the router/firewall does not support domain-based rules, then configure your firewall to permit the following IC2 server IP addresses: (added on 2017-09-14) (added on 2018-09-04) (added on 2018-11-19) (added on 2018-12-19)

Outgoing ports:
UDP port 5246 and
TCP port 443 and 5246

Last updated: December 19th, 2018

InControl Access Behind Nat
Hosted InControl2 IP addresses?
Incontrol source interface
Incontrol2 ~ When Subscription Expires
HA Slave visible in InControl2
Activating Fusion Hub behind firewall
MAX BR-1 not showing in InControl2
FAQ: Why does my device appear "offline" on InControl 2 even though the device has an internet connection?
What port is being used for incontrol and incontrol2?
Dynamic DNS on surf soho for webserver & VNC behind ISP router
Allowing ICA connecting to IC2 public cloud
InControl Public IP Addresses

A post was split to a new topic: Allowing ICA connecting to IC2 public cloud