Incon2 mgmt 3 x AP when update SSID setting


#1

Hi,
when updating a group managed SSID setting, for eg, like turning on block lan access for a SSID.
My clients get kicked off for about a minute, then intermittent performance for another minute and then back to normal.

Is this expected? If so the gui needs to warn you before hitting SAVE.


#2

From my experience, any time you change any configuration on the AP, it reloads the config and does a soft restart. You will see spotty connectivity until everything finishes. This seems to be of a longer duration if you are using the auto channel assignments. Those channel changes cause clients to reauthenticate.