Howto access a Wifi router connected to the WAN port on a MAX BR1 ..?

Product Discussion Pepwave MAX
1

Hw/sw is a MAX BR1 LTE (Europe) running 7.1.0 build 2860.

On the WAN port I have connected a Wifi router which runs DHCP. So the Pepwave MAX says Connected under WAN status. The WAN port is 192.168.89.10 whereas the gateway has ip address 192.168.89.1 . How can I access the Wifi router (192.168.89.1) from a host in the LAN (192.168.50.x) serviced by the Pepwave MAX?

2

In the usual way. When you try and access 192.168.89.1 the BR1 will forward that traffic via the WAN port unless the WAN port it not showing as healthy in which case an outbound policy set to enforce for the 192.168.89.0 network destination via the WAN port will then give you access…

1 Like
3

Thanks a lot Martin. It works like a charm.
Regards Rob

1 Like