Hello,
I’m currently doing some tests with the L2 functionallity and stumbled onto a problem. I want to forward a trunk of 4 VLAN’s to 2 remote Transit routers. I added VLAN 100 to my balance 1350 bridged it to the pepvpn/sf profile, everything works fine and then I tried to add a 2nd VLAN (101) and bridge it to same pepvpn profile and I get the error that this profile is already bridged to another vlan…
From the tests I’ve done and the comment from Martin I conclude that you can actually send a trunk trough the
L2 VLAN, but only by using it as a dumb unmanaged switch (i.e. creating an access port with the pepvpn vlan and then connect the trunk to it on both sides). This seems a dirty method because I already have the vlan’s accessible trough the regular LAN trunk connected to the balance…
Is this the right conclusion or am I overlooking something (I checked all the question marks for clues ;-))?
I also have a suggestion/feature request for the L2 VPN, is there a possibility to implement IGMPv3 on it?
As a broadcaster we use multicast video quite often and now it’s dangerous to use as the stream is send
to all VPN clients.
Best Regards,
Derek