When the customer has a DSL Internet link, the DSL modem will be configured in bridge mode and it will be connected to Peplink WAN interfaces configured as PPPoE.
The following steps will enable users to access the admin page of the DSL modem.
Setup- Balance 380 (WAN1 with PPPoE Connection Method) ➡ DSL Modem ➡ Internet
- Modem IP = 192.168.10.1, Mask = 255.255.255.0
Accessing the WAN modem when the WAN port is configured as PPPoE1. Navigate to Network > WAN > WAN1 > PPPoE Settings.
- Configure Management IP