💡 HA support for Balance 30

[mldowling]

Hello @Telford_Forgety,
If you can spare one of the WAN ports on each and a LAN port on each, there is a way to create something close to the HA feature, very similar to what @Steve.Taylor has posted here with the Pepwave MAX Active/Active solution.

Pepwave Max Active / Active

Here is a document to demonstrate how to setup 2 Max devices in an Active / Active pair to combine their total connections. The document shows the step-by-step setup for 2 x BR1’s, with guidance for 2 x HD2’s and 2 x HD4’s. On the LAN side of each device you would either have Access Points or a switch with Access Points connected. The recommendation is that each AP from both devices would have the same SSID’s / Password, with the latest 3.6.0 firmware on the AP’s you can enable the setting to…

Is this something you could do?
Happy to Help,
Marcus