eSIM on MAX BR1 Pro 5G

[Cable17]

@James_Lazo, @MartinLangmaid, @erickufrin As it turns out the BR1 Pro 5G does technically have eSIM support through Speedfusion Connect LTE according to SpeedFusion Services

I cannot however confirm how exactly it works, as I have never tried it on any of my BR1 Pro 5G devices myself. I would also check the countries listed to ensure eSIM support is possible there from this actual service. Indonesia was mentioned, so it might need to be confirmed.

Here are directions on how to actually activate the service on your own. Use the this link to get to this location SpeedFusion Services

1. Download and update device firmware to special version
   

   
   
   
   

   BR1 Pro 5G version of this firmware - https://download.peplink.com/firmware/br1c/fw-br1c_hd2d5g-8.2.0s011-build4965.bin

2. Login to BR1 Pro 5G device and select “Speedfusion Connect” on the Cellular WAN SIM connection.
   

   

3. Login to site - SpeedFusion Services From there it will bring up your Speedfusion Cloud and Speedfusion Connect plan options. Image under #4

4. Find the BR1 Pro 5G device you are looking for and select the box in the corner, and select “Top Up” at the bottom right.
   

   

5. From there a new screen will open, and select “Speedfusion Connect LTE” tab at the top.
   

6. Choose whatever plan you are looking for.

Once again I have not tried this myself, but these are technically the steps to activate eSIM support on the Peplink devices that can use them through Speedfusion Connect LTE. I do not believe there is a way to activate your own eSIM cards, but I could be wrong on that.