Empty Proxy path error

[Michael234]

My first time using the AP controller feature in my Balance 20x. An AP One Mini is connected to B20x via Ethernet. In the AP tab → access Point → Managed APs there is a line for the AP. On this line are 4 icons on the far right. The first is a square with an arrow in it.

Click on this and firmware says it will re-direct to an external AP web admin. I say YES and then get the error “Empty Proxy path”.

Am I missing something or is fate just picking on a newbie

B20x is firmware 8.2.1. The AP One is firmware 3.6.3.

[TK_Liew]

I have no problem accessing the web admin of AP via AP Controller (B20X with 8.2.1). Are you seeing the same settings below?

AP Controller (B20X)

Web admin of AP AC Mini via AP Controller

External AP web admin settings from AP Controller

Web admin setting from AP AC Mini

[Michael234]

Thanks for the screen shots, they pointed out my newbie configuration mistake.

AP tab → Settings → Web Administration Settings defaults to OFF. It has to be ON to enable web access to the AP.