Disable Pepwave MAX Firewall

Hi Folks,

Not sure if there is a way to do this but here goes.

Is there a method to disable the firewall on the pepwave max. I have a customer who is putting in his own dedicated firewall on the lan side and does not need to have a double firewall running. He’s only using the 3G/4G link for telemetry and control at a wind turbine station and does not use the WAN port.

in Advance

The default behavior of the firewall is to allow all inbound and outbound traffic. The firewall is as good as off at this point, but there is no single toggle for on/off.

1 Like