Hi!
Right now the cli have the command get s2svpn but It only show Established, Connecting.
I’ll like to include more info like the info in the GUI
[TABLE=“class: stat_table mvpn_status_table, width: 695”]
[TR=“class: tabletitle, bgcolor: #000000”]
SpeedFusion™
[/TR]
[TR=“class: tabletitle2 stat_info, bgcolor: #A0A0A0”]
Profile
Remote Networks
[/TR]
Tunel Name
192.168.8.0/22 192.168.21.0/24 192.168.22.0/24 192.168.23.0/24 192.168.24.0/24 192.168.25.0/24 192.168.26.0/24 192.168.27.0/24 192.168.28.0/24 192.168.29.0/24 192.168.30.0/24 192.168.31.0/24 192.168.32.0/24 192.168.33.0/24 192.168.34.0/24 192.168.35.0/24 192.168.201.128/26 200.38.193.226/32
[TR=“class: conn_row conn_1”]
ISP A
Rx:0 kbps
Tx:1 kbps
Drop rate:0.00/s
Latency:38ms
[/TR]
[TR=“class: conn_row conn_2”]
ISP B
Rx:1 kbps
Tx:2 kbps
Drop rate:0.00/s
Latency:40ms
[/TR]
[TR=“class: conn_row conn_3”]
ISP C
Rx:0 kbps
Tx:1 kbps
Drop rate:0.00/s
Latency:40ms
[/TR]
[TR=“class: conn_row conn_0”]
Total
Rx:1 kbps
Tx:4 kbps
Drop rate:0.00/s
[/TR]
[/TABLE]
I know is a cli and the info has to be text, so instead of the lock write encrypted
Tunel name Connected Encrypted
Total Bandwidth RX: 1kbps TX: 4 kbps Drop rate: 0.00/s
ISP A Bandwidth Connected RX: 0 TX: 1 Drop 0.00 Latency: 38
ISP B Not Connected
ISP C Bandwidth Connected RX: 15 TX: 1 Drop 3.23 Latency: 234
Tunel name2 Connected Decrypted
ISP A Bandwidth Connected RX: 0 TX: 1 Drop 0.00 Latency: 38
ISP B Not Connected
Tunel name3 Connecting
ISP A Not Connected
ISP C Not Connected
Tunel name4 Updating Routes
ISP A Not Connected
ISP B Bandwidth Connected RX: 0 TX: 1 Drop 0.00 Latency: 38
ISP C Not Connected
AG