Hi,
I have 1 link internet 30mbps. Then I need to separate into two bandwidth. one is 25mbps and another one is 5mbps. Is it possible peplink load balancer can do it ? need an advice. TQ
Hello ahmadhashim,
You can split/dedicate bandwidth. I would advise doing this with two different VLANs. You can search how to setup VLANs in this post here. To enable the bandwidth controls, you’ll need to navigate to Network > QoS > Bandwidth Control and make sure to enable it. You can use either the Group Bandwidth Reservation or the Individual Bandwidth Limit. For your use case I would probably recommend using the Individual Bandwidth Limit.
You will want to define the bandwidth for Staff and Guest. Make sure to click Save after you’ve defined everything. Now navigate the the User Groups. In the User Groups tab you can add and define subnets as Manger, Staff, or Guest. In the image below I just used 192.168.5.1/24 as an example.
1 Like