Advise please. Using WAN 2 as a LAN port on Balance 20

I’d like to be able to use my second WAN port on my Balance 20 as another LAN port for a different network.

The 4 LAN ports will each be taken up, and I would like to have the open WAN port to support a separate network for a camera system. I can do this with my Balance 710 back at the office, but cannot find the same option under the Port Settings of my Balance 20.

Is this possible on the Balance 20?

This is not possible on the Balance 20, those are dedicated WAN ports. If you need more than 4 LAN ports I recommend to get a compatible switch. Thanks

1 Like

Thank you. I wasn’t sure if this was the case.