I have a public ip address range /29 from the service provider. I have assigned .9 and .10 as point to point for internet connectivity on the router. I have natted the remaining public ip address to the public ip address but i cant the connection public outside ip address from the outside. Kindly assist
An internet service provider assigned 102.88.21.0/29 to me for dedicated internet. I have already configured 102.88.21.9 as my ip address and default gateway 102.88.21.10 for internet connectivity on the peplink balance. I need to assign the remaining block of ip address to my servers on LAN port ( 102.88.21.1- 102.88.21.7). I have tried using NAT mode to map my private ip address to each public address but i could not reach server through the public ip address. Please assist.
An internet service provider assigned 102.88.21.0/29 to me for dedicated internet. I have already configured 102.88.21.9 as my ip address and default gateway 102.88.21.10 for internet connectivity on the peplink balance. I need to assign the remaining block of ip address to my servers on LAN port ( 102.88.21.1- 102.88.21.7). I have tried using NAT mode to map my private ip address to each public address but i could not reach server through the public ip address. Please assist
If they did assign 102.88.21.0/29 then your host IPs would need to be within the 102.88.21.1 - 102.88.21.6 range. But you’re using 102.88.21.9 which is from the 102.88.21.8/29 subnet…